If you replace the filter before it’s dry, the housing becomes the perfect environment for mould to grow.
There are two reasons for this:.It’s much easier to work with the floorhead when it’s not attached to the main vacuum..
Removing the floorhead means there’s no chance of accidentally switching the vacuum on while cleaning the brush, which could cause injury..Step 2: Remove The Brush Bar.Use a coin to turn the lock at the end of the Vax Blade 4 brush bar.
You should then be able to slide out the brush bar from the floorhead, which makes it much easier to clean.. On a side note, it’s great that Vax makes it so simple to remove the brush bar from the Blade 4’s floorhead.Maintenance is often overlooked when buying a vacuum cleaner, but it’s much easier to clean the Blade 4’s brush bar than many other models..
Step 3: Cut Away Tangled Hair Or Carpet Fibres.
Now it’s time to cut away hair and other fibres that have become caught around the brush bar.. Slide the scissors along the groove in the brush bar, as this makes it easier to get the scissors underneath the fibres.Remove the dust container and take it to an outdoor bin..
Hold the container over the outdoor bin, then push the door release button to open the swing door..Allow the dirt to fall into the bin.. Re-insert the dust container into the vacuum.. It’s worth noting here that you don’t.
to use an outdoor bin when emptying a Roomba.We recommend it to avoid dust and allergens escaping into the air though..